• New

YELLOW eSUN PETG 1.75mm 3D Printer Filament

$37.38
Tax included *

1kg/Roll 1.75mm diameter YELLOW Esun PETG 3D Printer Filament, vacuum sealed and box packed. 

(eSUN YELLOW = Translucent YELLOW)

Quantity
in stock

WHAT:

1kg/Roll 1.75mm diameter YELLOW Esun PETG 3D Printer Filament, vacuum sealed and box packed. 

(eSUN YELLOW = Translucent YELLOW)

HOW:

Tips provided to achieve good PETG Printing:

1. Preferred Printing temperature is 230-250C and hot bed temperature is 60-90C.

2. If has printing difficulty, turn off cooling fan and print at slow printing speed between 20-35mm/s. Bowden feeding is totally all right.

3. Good first layer: minimize the gap between nozzle tip and hot bed as closely as possible and print on masking tape/ PEI sheet/glass bed with PVC glue/slurry/har spray or other feasible agent.

INTRODUCTION:

PETG (Polyethylene Terephthalate Glycol-modified) offers the best of both ABS and PLA for a win-win alternative to choosing one or the other. PETG plastic offers stiff, durable strength (like ABS) and ease of use (like PLA)—no heating bed needed. It’s also appreciated for its easy bed adhesion and glossy type finish for impressive final results.

HIGHLIGHTS: 

- Odorless and little shrinkage rate;

- Hydrophobicity (Will not absorb water and as such clog the extruders);

- Outstanding toughness and high impact strength;

- Good liquidity (flows smoothly);

- High mehanical strength and excellent flexibility;

- High transparency and Good gloss

SPECIFICATIONS: 

Filament diameter:1.75mm:±0.02mm 

Certification: ROHS Certified, REACH 

Recommend print temperature: 230-250C 

Gross Weight:~1.4kg/Roll (including package box plus spool) 

Materials: PETG (Polyethylene Terephthalate Glycol-modified)

eSUN
YELLOW eSUN PETG

You might also like