SUNLU 3D Filament Dryer Box S2

The extraordinary curved design appearance is more difficult than normal rectangular

Increasing the bottom-supported by adding four feet to the bottom does not only improve the

functionality of anti-skid but also avoids the heat conduction to other objects by adding more space between product and surface.

The design of upper and lower double heating

The design of the upper and lower double heating plate increase 30k heating efficiency and raises the heated temperature up to degrees.

360° CONSTANT TEMPERATURE

The round inner box has excellent thermal cycle performance compared to the square

box, 360° encircling heating, uniform heat inside the box, and the temperature

difference at different points is less than 1°

Touch Screen

3.42*2.87inch

3.42±2.87inch smart touch screen within 0.1-second touch feedback. It can be accurately set even under poor lighting conditions.A large 46-inch LCD display, simultaneously display

temperature, time, humidity, consumables type, and countdown time.

Intelligent presets for multiple filaments and drying modes, no need for manual setting.

After the test. the best drying time and temperature are summarized, like PLA, ABS, and T PCI etc. Which reduced the workload of searching for consumables setting dates. Customized temperature and times at the touch of a button through the touchscreen.

Product specifications

Product size: 265(L) X274(W) X 118(H) mm
Maximum capacity: φ210*85（H）mm
Net weight: 1190g (Including power adapter)
Working environment:
A) Environment temperature: 20℃~35℃
B) Relative humidity: ≤90%
Temperature setting range: 35℃~70℃
Power adapter specification:
A) Input specification: AC 100V~240V，50/60Hz
B) Output specification: DC:24V±1.2, 2A
Standby Power: 0.05W
Maximum working current: 1.9A
Maximum working power: 48W
LCD display screen: 6.4-inch LCD display
Suitable for filament diameters: 1.75mm/2.85mm