- -$200.00
LDO Voron V2.4 R2 (RevC) 3D Printer Kit (including RSP 4B board + high Flow E3D REVO)
$3,448.85
$3,248.85
Save $200.00
Tax included
*
backorder Allowed. New stock arrives in December.
including RSP 4B board + high Flow E3D REVO
The Voron V2.4r2 (RevC) 3D printing kit by LDO is all the hardware essentials you'll need to make your very own Voron printer at home. The Voron 2.4r2 (RevC) is the largest of the Voron family with this kit boasting a 350mm cubed build volume. The V2.4r2 (RevC) kit includes features such as an inductive probe, high quality stainless steel rails, and tools for input shaper calibration and headset insertion
*This is a general parts kit, 3D printed parts and raspberry pi are not included and will need to be sourced separately*
Default Colour: GREY
Feel free to come in-store to browse our selection and have a demo.
Video about Review of Voron 2.4r2 (RevC):
Video about Build Livestream of Voron V2.4r2:
Video about Build Experience of Voron V2.4r2:
Features of the Kit:
- V2.4r2 Compatibility
- Stainless Steel Linear Rails - 12H size rails for X axis included
- Modified Hartk Toolhead PCB
- Custom machined brass headset insert tool for soldering irons
- Input Shaper tool
- Pre-cut, wired, crimped and/or soldered wiring for all parts
- LED Lighting
- Nevermore Filter (Parts for optional internal circulation filter
- Omron inductive probe and optional "Klicky" microswitch probe
- Small tools - set of hex wrenches, flathead screwdriver, 2mm drill bit
Included in the kit (BOM):
| Box | Item | Qty. |
| Cable Kit 2.4-350 | Power Cables | 1 |
| Toolhead PCB Cables | 1 | |
| Breakout PCB Cables | 1 | |
| Misc. Cables | 1 | |
| Motion | Bearing, F695-2RS | 20 |
| Bearing, 625-2RS | 12 | |
| Pulley, 2GT, 16T, (5mm ID 6mm W) | 4 | |
| Pulley, 2GT, 20T, Deflanged | 1 | |
| Pulley, 2GT, 20T, (5mm ID 6mm W) | 2 | |
| Pulley, 2GT, 20T, (5mm ID 9mm W) | 4 | |
| Pulley, 2GT, 80T, (5mm ID 6mm W) | 4 | |
| Idler, 2GT, 20T, (5mm ID 6mm W) | 2 | |
| Idler, 2GT, 20T, (5mm ID 9mm W) | 4 | |
| Shaft, 5x60mm | 4 | |
| Shaft, for Nozzle Probe | 1 | |
| Thumb Screw Kit | 1 | |
| MR85 Bearing | 2 | |
| Bondtech BMG Parts | 1 | |
| 4mm Bowden Coupler | 1 | |
| Teflon Tube (4mm OD 2mm ID) - 10cm | 1 | |
| Foam Tape, 1mm | 1 | |
| Foam Tape, 3mm | 1 | |
| Sandpaper | 2 | |
| Electronics 1 | BTT 4.3inch TFT LCD Display, Capacitive Touch Screen, for RPi DSI | 1 |
| AC Inlet, Integrated Switch & Fuse | 1 | |
| Keystone CAT6 Insert | 1 | |
| Raspberry Pi 4B (OPTIONAL item, check with your reseller whether the RPi is included) | 1 | |
| Heatsink, for Raspberry Pi | 1 | |
| Solid State Relay, Omron | 1 | |
| DIN Rail Mount Bracket for SSR | 1 | |
| Fiberglass Tape, 2x12cm | 1 | |
| Wago 221-412 Terminal | 2 | |
| SD Card, 16GB | 1 | |
| Electronics 2 | Toolhead PCB | 1 |
| Fan Adapter PCB |
1 |
|
| Breakout PCB | 1 | |
| Stealthburner Neopixels | 1 | |
| XY Endstop PCB | 1 | |
| 3x2 XH Splicer PCB | 2 | |
| 2x2 XH Splicer PCB | 1 | |
| Z Endstop PCB | 1 | |
| Octopus Pwr.Adapter PCB | 1 | |
| Klicky Probe Kit | 1 | |
| LDO Input Shaper Toolkit | 1 | |
| Print a Steppy Kit (LDO Mascot) | 1 | |
| TMC2209 Stepper Motor Driver, BigTreeTech | 7 | |
| Terminal Block, UK2.5B, Blue | 2 | |
| Terminal Block, UK2.5B, Red | 2 | |
| Terminal Block, UK2.5B, Ground | 2 | |
| Bridge, UK2.5B, 10 pos. | 1 | |
| Cover Plate, UK2.5B | 3 | |
| End Block for DIN Rail | 2 | |
| Tape, 3M VHB | 1 | |
| DIN Rail Plastic Endcap | 4 | |
| Brass Brush | 1 | |
| Fasteners,Tools&Misc | Machine Screw, BHCS, M5x10 | 52 |
| Machine Screw, BHCS, M5x14 | 4 | |
| Machine Screw, BHCS, M5x16 | 43 | |
| Machine Screw, BHCS, M5x30 | 26 | |
| Machine Screw, SHCS, M5x40 | 26 | |
| Machine Screw, BHCS, M3x6 | 14 | |
| Machine Screw, SHCS, M3x8 | 273 | |
| Machine Screw, FHCS, M3x10 | 8 | |
| Machine Screw, SHCS, M3x12 | 50 | |
| Machine Screw, SHCS, M3x16 | 30 | |
| Machine Screw, SHCS, M3x20 | 40 | |
| Machine Screw, BHCS, M3x25 | 6 | |
| Machine Screw, Wafer head, M3x25 | 3 | |
| Machine Screw, SHCS, M3x25 | 12 | |
| Machine Screw, SHCS, M3x30 | 44 | |
| Machine Screw, SHCS, M3x35 | 6 | |
| Machine Screw, SHCS, M3x40 | 34 | |
| Machine Screw, SHCS, M3x50 | 4 | |
| Machine Screw, FHCS, M3x6 | 26 | |
| Machine Screw, BHCS, M4x6 | 8 | |
| Self-tapping Screw, M2x10 | 43 | |
| Hexnut, M5 | 30 | |
| Hexnut, M3 | 14 | |
| T-nut, Roll-in, 2020, M5 | 80 | |
| T-nut, Roll-in, 2020, M3 | 135 | |
| Heatset Insert, Brass, M3x5x4 | 153 | |
| Washer, M5, 1mm | 9 | |
| Precision Spacer, M5, 1mm | 46 | |
| Washer, M3 | 6 | |
| Knurled Nut, M4 | 4 | |
| T-nut, Hammer Head, 2020, M3 | 75 | |
| T-nut, Hammer Head, 2020, M5 | 16 | |
| Setscrew M4*4 DIN916 | 32 | |
| Setscrew M3*2 DIN916 | 5 | |
| Machine Screw, Captive, M3x6 | 2 | |
| 6x3mm Neodymium Magnet | 14 | |
| Teflon Tube (4mm OD 3mm ID) - 1.2m | 1 | |
| Zip Ties, 3x150mm | 100 | |
| Filament, PETG, Clear, 10m | 1 | |
| Brass Heatset Insert tool (for M3 Brass Inserts) | 1 | |
| Drill bit, 2mm | 1 | |
| Hex Wrench, 1.5mm | 3 | |
| Hex Wrench, 2mm | 1 | |
| Hex Wrench, 2.5mm | 1 | |
| Hex Wrench, 3mm | 1 | |
| Hex Wrench, 4mm | 1 | |
| Slot head screwdriver, 2.5mm | 1 | |
| Aluminium Handle | 2 | |
| Belts, Chains, & Fans | 50x50x15 Centrifugal Fan (24V) | 1 |
| 40x40x10 Axial Fan (24V) | 1 | |
| Nevermore Micro V5 Parts | 1 | |
| 60x60x20 Fan (24V) | 2 | |
| Gates Open Belt, 2GT, 9mm (by metre) | 5.5 | |
| Gates Open Belt, 2GT, 6mm (by metre) | 5.5 | |
| Gates Belt Loop, 2GT, 6x188mm | 4 | |
| Rubber Feet, 38x19mm (Amplifier Cabinet Feet) | 4 | |
| Drag Chain, 10x10mm, R18 | 2 | |
| Drag Chain, 10x15mm, R28 | 1 | |
| Linear Rail Kit | Linear Rail Stainless Steel, LDO-SLR12H-400Z0 | 1 |
| Linear Rail Stainless Steel, LDO-SLR9H-400Z0 | 6 | |
| Buildplate | Magnetic Pad 2.4-350 | 1 |
| Spring Steel Flex Plate 2.4-350 | 1 | |
| Build Plate, Cast 5083 Aluminium, Blanchard Ground, w/ LDO AC Heatpad & Thermal Fuse (125C), 355x355x10mm | 1 | |
| Panels | Deck Panel, Acrylic, Black, 469x469x4mm | 1 |
| Back Panel, Acrylic, Black, 483x503x3mm | 1 | |
| Bottom Panel, Acrylic, Black, 469x469x3mm | 1 | |
| Door Panel, Acrylic, Clear, 241x503x3mm | 2 | |
| Side Panel, Acrylic, Clear, 483x503x3mm | 2 | |
| Top Panel, Acrylic, Clear, 483x483x3mm | 1 | |
|
Frame Kit
|
LDO V2.4 Frame kit 350, included the followed extrusions: LDO-V2.4F350-2020T-340E, 1 pc LDO-V2.4F350-2020T-430D, 1 pc LDO-V2.4F350-2020T-450C, 2 pcs LDO-V2.4F350-2020T-470A, 10 pcs LDO-V2.4F350-2020T-530B, 4 pcs |
1 |
| Motor Kit |
LDO V2.4 Motor Kit, included the followed motors. 1PCS LDO-36STH20-1004AHG(VRN) , E 2PCS LDO-42STH48-2004MAH(VRN), XY 4PCS LDO-42STH48-2004AC(VRN), Z |
1 |
| Other | DIN Rails (35mm W) | 2 |
| Other | BigTreeTech Octopus V1.1 | 1 |
| Other | Meanwell LRS-200-24 PSU* | 1 |
| Other | C13 Power Cord 1.5 meter | 1 |
| Other | PVC Wire Duct 20Wx25H | 5 |
| Other | Extrusion Slot Cover, 6mm width | 3 |
| Other | E3D Revo Hotend LDO Edition, with 0.4/0.6mm, 2 nozzles | 1 |
Voron V2.4r2 (RevC) assembly/tuning guide and additional resources
Voron V2.4 RevC
You might also like
Customers who bought this product also bought:
Comments (0)
No customer reviews for the moment.
16 other products in the same category:
![[Back-Order] GUDMAKER...](https://marvle3d.co.nz/6925-home_default/-back-order-gudmaker-maglate-pei-build-plate-235-235mm-for-3d-printing-and-magnetic-sticker-with-3m-adhesive.jpg)
![[Pre-Order] Flashforge...](https://marvle3d.co.nz/8179-home_default/-pre-order-flashforge-adventurer-5m-pro-printer.jpg)
![[Back Order ]Creality CR...](https://marvle3d.co.nz/6991-home_default/-back-order-creality-cr-touch-auto-leveling-kit.jpg)
![[Pre-Order] INTAMSYS Funmat...](https://marvle3d.co.nz/6528-home_default/-pre-order-intamsys-funmat-ht-industry-level-3d-printer-enhanced-version-.jpg)
backorder Allowed. New stock arrives in December.
including RSP 4B board + high Flow E3D REVO
The Voron V2.4r2 (RevC) 3D printing kit by LDO is all the hardware essentials you'll need to make your very own Voron printer at home. The Voron 2.4r2 (RevC) is the largest of the Voron family with this kit boasting a 350mm cubed build volume. The V2.4r2 (RevC) kit includes features such as an inductive probe, high quality stainless steel rails, and tools for input shaper calibration and headset insertion
*This is a general parts kit, 3D printed parts and raspberry pi are not included and will need to be sourced separately*
Default Colour: GREY
Feel free to come in-store to browse our selection and have a demo.