• New

500g RED ABS-like ELEGOO LCD UV-CURING PHOTOPOLYMER RAPID RESIN FOR 3D PRINTERS

$52.17
Tax included *

Volume: 500g/bottle

Resin Parameters:

Viscosity: 150-250MPa·s

Absorption band: 385nm-410nm(wavelength)

Desity: 1.05-1.25g/cm3

Flexural Modulus: 1.882-2.385Mpa

Bending Strength: 40-70mpa

Thermal Deformation Temperature: 80℃

Volume Shrinkage: 3.72-4.24%

Linear Shrinkage: 1.05-1.35%

Tensile Strength: 30-52mpa

Tensile Modulus: 1.779-2.385mpa

Shore Hardness: 75D

Glass Transition Temperature: 100℃

Notch Impact Strength: 41-48j/m

Quantity
in stock

Parameters:

Low Shrinkage and High PrecisionELEGOO photopolymer resin is specially designed for reducing volume shrinkage during the Photocuring process ,which ensures the high precision of the print model with smooth finish.

Fast Curing and Great StabilityELEGOO 405nm Rapid Resin was designed to significantly reduce printing time with its excellent fluidity. Meanwhile its great stability and proper hardness guarantee a worry-free printing experience and successful printing.

Bright and Stunning Colors: With high quality pigments and photo-initiators inside ELEGOO UV-Curing resin, the models printed with resin have a very pure and stunning color effect just like an artwork.

Wide ApplicationsGiven the outstanding performances, ELEGOO standard resin is suitable for most DLP/LCD 3D printers. Works best with the LCD 3D Printers.

Safe and Secure PackagingLeak-proof bottle fully wrapped with a plastic bubble bag and exquisite designed package box make sure the resin stays in place where they belong

 

 

Sample Printing Parameters Setting For Elegoo Mars:

 

Bottom Exposure:60s

Normal Exposure:8s

 

Resin Parameters:

Viscosity: 150-250MPa·s

Absorption band: 385nm-410nm(wavelength)

Desity: 1.05-1.25g/cm3

Flexural Modulus: 1.882-2.385Mpa

Bending Strength: 40-70mpa

Thermal Deformation Temperature: 80℃

Volume Shrinkage: 3.72-4.24%

Linear Shrinkage: 1.05-1.35%

Tensile Strength: 30-52mpa

Tensile Modulus: 1.779-2.385mpa

Shore Hardness: 75D

Glass Transition Temperature: 100℃

Notch Impact Strength: 41-48j/m

 

Precautions:

(Dealing with resin could be messy and risky sometimes. To have a safer and better user experience, please follow the instructions below)

 

Shake well before use

Recommeded temperature 20°C - 25°C

Always wear gloves and mask to avoid direct skin contact

Keep away from children, dust and direct sunlight

Wash with plenty of water immediately if you get direct skin contact with resin

 

 

Elegoo ABS-like RED - 500g

You might also like