Marvle3D HIPS 3D Filament - 3 COLORS Available
$30.00
Tax included
*
HIPS, aka, High Impact Polystyrene. It is a material blend of polystyrene and rubber. They share a lot of the same characteristics and qualities. HIPS is versatile, economical, and impact resistant.
HIPS has many of the same printing properties as ABS. it’s more dimensionally stable and slightly lighter than ABS, making it a great choice for parts that would end up getting worn out or used in applications that can benefit from the lighter weight. It is suitable for single nozzle printing.
Because it dissolves in limonene solution (ABS will not), it can also be used for ABS printing support material, eliminating the need for removal via abrasives, cutting tools, or any other such things that leave your print less-than-perfect.
Printing Parameters
- Best print temperature: 230-250 °C
- Density: 1.05±0.05g/cm3
- Melt flow index: 3(200℃/10kg)
- Printing speed: 40-100mm/s
- Tensile strength: 27Mpa
- Flexural modulus: 2280Mpa
- Elongation at break: ≥55%
- Diameter: ϕ1.75mm ϕ3mm
- Bubble: 100% (no bubble)
- Net weight: 1kg 400m
- Plate temperature: 90-110°C
Strength: High
Flexibility: Medium
Durability: High
Ease of Use: Low/Medium
Shrinkage/Warping: Minimal
Hydroscopic: No
Soluble: In limonene
HIPS
You might also like
Customers who bought this product also bought:
Comments (0)
No customer reviews for the moment.
16 other products in the same category:
HIPS, aka, High Impact Polystyrene. It is a material blend of polystyrene and rubber. They share a lot of the same characteristics and qualities. HIPS is versatile, economical, and impact resistant.
HIPS has many of the same printing properties as ABS. it’s more dimensionally stable and slightly lighter than ABS, making it a great choice for parts that would end up getting worn out or used in applications that can benefit from the lighter weight. It is suitable for single nozzle printing.
Because it dissolves in limonene solution (ABS will not), it can also be used for ABS printing support material, eliminating the need for removal via abrasives, cutting tools, or any other such things that leave your print less-than-perfect.