Marvle3D ABS+ Grey 3D Filaments 1.75mm
ABS+ is improved and upgraded based on ABS.
Cracking and warping have been significantly improved.
High Strength. Better Toughness. Heat Resistance. Excellent Impact Strength.
ABS + Printing Parameters
Best print temperature: 230-250 °C
Plate temperature: 100-110 °C
Feed rate: 30-90mm/s
Idling speed: 90-150mm/s
The all-new ABS+ filament has the following features:
1. Optimized to print with significantly less warping
2. With good melt mobility and smooth printing.
3. With high toughness, hardness and rigidity, and good scratch resistance.
4. With good heat resistance and oil resistance.