• New
Marvle 3D Black PC 1.75mm Filament 1kg
  • Marvle 3D Black PC 1.75mm Filament 1kg
  • Marvle 3D Black PC 1.75mm Filament 1kg
  • Marvle 3D Black PC 1.75mm Filament 1kg
  • Marvle 3D Black PC 1.75mm Filament 1kg

Marvle 3D Black PC 1.75mm Filament 1kg

Tax included *

Polycarbonate (PC) is a high strength material intended for tough environments and engineering applications. It has extremely high heat deflection, and impact resistance. 

PC is the King of cost-effective engineering thermoplastics, thanks to High-Temperature resistance, UV stability & Flame Retarding.

Print temperature range: 240-260℃;

Colour: Black

in stock

Bed Temp: 80-120 c.

Extruder Temp: 260-310 c.

PC also has a high glass transition temperature of 150° Celsius. This means it will maintain its structural integrity up to that temperature, making it suitable for use in high-temperature applications.

 It can also be bent without breaking and is often used in applications where some minor flexibility is required.

Polycarbonate is extremely hygroscopic, meaning it will absorb moisture from the air, which will affect its printing performance and strength. It should be stored in air-tight, moisture-free containers after opening.

 It also requires very high temperatures for printing and will exhibit layer separation if printed at too low of a temperature or with excessive cooling enabled.

Polycarbonate is frequently best printed on a machine that has an enclosed build volume and is capable of handling high bed and extruder temperatures.

PEI is the best build surface for Polycarbonate


1: If parts are overheating, curling, or showing signs of drooping when printing sharp overhangs, consider setting the fan to 0% for the first layer (to ensure good bed adhesion), but then increase the fan speed to 40% or below after about 4 or 5 layers.

2: If some moisture has been absorbed by the material, try lowering the printing temperature to 280°C or below, which can help prevent artifacts or bubbles in the print from the moisture content.

Comments (0)
No customer reviews for the moment.