Marvle3D PLA+ 3D Filament, 1.75mm, 1kg

INTRODUCTION:

PLA+ can be taken as an upgraded version of PLA(Polylactic Acid,). This material is stronger in toughness and gets a combination of silk gloss. It is a multipurpose material commonly used in 3D printing. PLA+ 3D Printer filament is a bioplastic, which means it is made from renewable natural resources such as corn starch and tapioca products. As a biodegradable material, it is much better for the environment.

All Marvle3D 3D Printer Filament is vacuum sealed with desiccant for storage and freshness. They are made from high-quality USA NatureWorks INGEO biopolymer materials. Less likely to warp compared to other materials. Marvle3D PLA+ has better colour performance than esun's PLA+ but its strength is a bit weaker.

HOW to achieve successful printing of PLA+:

1. Preferred Printing temperature is 200-230C and the hotbed temperature is 60-70C. (note: It has a different setting with esun PLA+) Recommend to start heating from 200C and dry the filament before use for best performance. (dry in the oven at 40-50C for about 2 hours)

2. Minimize the gap between the nozzle and hotbed as closely as possible (thinner than A4 paper). 

3. Recommended to print on masking tape/ PEI sheet/glass bed with glue for good first layer adhesion.

CUSTOMER TESTIMONIAL: 
- Product as described and items were well packaged as always. I will be buying more from this seller for sure. 
- Your PLA filament is an awesome product. Special thanks to the very speedy delivery, 5-star! Very happy with this trader. 
- Been through a few Marvle3D rolls and they all have been perfect. Have added it to my favourite trader list and will trade again. 

SPECIFICATIONS: 
Net Weight: 1kg/Roll 
Density:1.25±0.05g/cm³ 
1 Spool filament length:340m 
Recommend print speed:40-90mm/s 
Filament diameter:1.75mm:±0.02mm 
Certification: ROHS Certified, REACH 
Filament Box Dimension: 20*5.8*6.6cm 
Recommend print temperature: 190-220C
Gross Weight:~1.4kg/Roll (including package box plus spool)