ELEGOO JUPITER 3D resin PRINTER
Stock is coming in local stock in June, 2022. Pre-order allowed.
Marvle3D is Elegoo's NZ local official distributor. Qualification can be checked on Elegoo's official website. Guaranteed to provide reliable and high quality service.
The upcoming Elegoo Jupiter will be Elegoo's largest printer.
12.8" 6K LCD screen, with the higher resolution on the 6k LCD, the higher model quality than you normally get on resin printers.
The whole body and major components are all made of high-strength metal. The 5.0" capacitive screen is easy to view and touch.
The Z-axis adopts a high-quality ball screw for smooth and durable operation, and the whole printing process is quiet and silent compared to other printers.
Youtube Introduction: https://www.youtube.com/watch?v=ab18Nu0iGyI
Check out the pro review: https://all3dp.com/1/elegoo-jupiter-review-3d-printer-specs/
This package offers a bottle of 1kg washable resin, so you can directly start printing with your brand new 3D printer.
- 1 X Jupiter printer.
- 1 x ESUN 1000G WATER WASHABLE RESIN FOR LCD 3D PRINTERS, 1000G GREY
Washing and Curing Package:
Your Resin model needs to get washed after it prints out. The Washing/Curing machine helps you to solve the problem. Sealed washing to prevent the volatilization of alcohol during the cleaning process. Fan-less curing mode makes it quieter to use. The anti-UV lid can block 99.95% of ultraviolet rays to protect your eyes.
-1x ELEGOO MERCURY X BUNDLE WASHING AND CURING MACHINE
-2 x ESUN 1000G WATER WASHABLE RESIN FOR LCD 3D PRINTERS, 1000G GREY
- 1 X Jupiter printer.
1: Large Build Volume: The Elegoo Jupiter will sport a 277 x 156 x 300 mm build volume. Compared to Elegoo’s previous largest 3D printer in the roster, the large(-ish) Saturn (192 x 120 x 200 mm) the Jupiter offers roughly three times the total print room.
2: 6K LCD Screen: The 277 x 156 mm printable area is facilitated by the 12.8-inch LCD screen the Jupiter houses. With 5448 x 3064 pixels spread out across the LCD, Jupiter can print at an accuracy of 51 microns.
3: Automatic Resin Feeding: Jupiter comes with a unique screw-on cap for resin bottles that allows you to place them upside-down (without spilling resin, obviously) inside the back of the printer with an influx to the top of your resin should it run low.
4: Sturdy Build: The printer’s body and casing are made of sheet metal topped with aluminium alloy for its handles and other components.
On the inside, the printer comes with a dual rail-guided lead screw with four sliders that promise smooth and durable operation. According to Elegoo, this will effectively reduce the Z-axis wobble phenomenon, also referred to as “Z-axis nodding,” which some users encountered on Mars 3.
What’s more, according to Elegoo, Jupiter’s build also allows you to easily upgrade the printer with expansion kits, such as increasing the height of the Z-axis to 500 mm.
5: Touchscreen and New UI: A large printer needs a large operational panel. Elegoo decided to go with a 5-inch colour touchscreen that should provide all the ease of use and accessibility you would want.
COB light source: Equipped with a powerful COB light source, Jupiter promises a high light utilization and uniform distribution that should help to create clean and accurate prints.
Built-in LED lighting: Even more LEDs, not for curing this time, though. The print chamber will light up if you open the doors, allowing you to take a proper look.
Air purifier: Before the stinky smell of resin 3D printing gets ventilated out tough the cooling fans, you can run it through an inbuilt activated carbon filter. It looks like it will be easily interchangeable. A big plus, as these things run dry over time and need to be replaced.
One-year warranty on the whole printer (6K LCD, FEP film, and tool kit excluded). Quality and fast customer service.
We also offer two different bundles for this printer, see the description for more detail.