• New
Elegoo Mercury x Bundle Washing and curing Machine
search
  • Elegoo Mercury x Bundle Washing and curing Machine
  • Elegoo Mercury x Bundle Washing and curing Machine
  • Elegoo Mercury x Bundle Washing and curing Machine
  • Elegoo Mercury x Bundle Washing and curing Machine
  • Elegoo Mercury x Bundle Washing and curing Machine
  • Elegoo Mercury x Bundle Washing and curing Machine
  • Elegoo Mercury x Bundle Washing and curing Machine
  • Elegoo Mercury x Bundle Washing and curing Machine

Elegoo Mercury x Bundle Washing and curing Machine

$320.00
Tax included *

Auckland Local Stock

Marvle3D is Elegoo's NZ local official distributor. Qualification can be checked on Elegoo's official website. Guaranteed to provide reliable and high quality service.

Sealed washing to prevent the volatilization of alcohol during the cleaning process . Fan-less curing mode makes it quieter to use. The anti-UV lid can block 99.95% of ultraviolet rays to protect your eyes.

The front TFT screen can directly display the setting time and remaining time, and the operation is simple and intuitive. With built-in 16 pcs of 405nm UV LED and a 360-degree rotating turntable, you can uniformly cure the model.

Quantity
in stock

Check out the official video: https://www.youtube.com/watch?v=GtHVpbxjOqs

Transparent Yellow ShadeEffective blocking 99.9% UV light. The maximum size of the supporting printer is 9.1 inches

Faye Mirror DesignThe entire effective curing area, light power distribution more uniform.

360 ° Three-Dimensional CuringThe curing platform can be 360 ° automatic rotation, curing size φ200 * 260mm.

Bottom Light Source DesignThe bottom to increase the light source design, the base can also be cured, do not let go of every detail, fully curing the model.

Sealed Water Tank & Large-Capacity Design:8000ML large-capacity design, using rubber sealing strips, safe and reliable.

Operation KnobLong press 3 seconds to turn on the machine, integrated operation panel plus light with, simple operation.

Super Long Time SettingMaximum adjustment of 30 minutes.

Dual Connector Power AdapterTo meet the needs of CURE and WASH work at the same time.

Curing Mode and Cleaning Mode Completely SeparateMercuryX WASH and MercuryX CURE can work at the same time, one for cleaning work and one for curing work.

The models can be placed in a cleaning basket to be cleaned separately, or mount the build plate with models on it and wash them together, which can avoid direct contact with the uncured resin. 

Specifications:

ELEGOO MercuryX WASH Machine

Control Method: Knob + Button

Rated Power: 12W

Input Voltage: 110V/240V 50/60Hz

Time Setting: 0-30mins

Machine Size: 255mm*155mm*385.5mm

Maximum Wash Volume:

180mm*121mm*153mm (with platform)

201mm*124mm*255mm (without platform)

Machine Net Weight: 2.27kg

ELEGOO MercuryX CURE Machine

Control Method: Knob + Button

Rated Power: 36W

Input Voltage: 110V/240V 50/60Hz

Time Setting: 0-30mins

Machine Size: 246mm*230mm*363.5mm

Maximum Curing Size: φ200mm*260mm

Machine Net Weight: 2.4kg

 

Package Included:

1 x MercuryX Bundle Washing and Curing Machine

 

Operation Instructions:

After the model is printed, please clean and blow-dry the model before putting it into the machine.

If the model becomes yellow after curing, please reduce the curing time. Over curing will lead to a yellowish model.

Recommended ambient temperature is 0-40 degrees, and the ambient humidity temperature is 20%-50%.

Please do not use it for more than 40 minutes at a time to avoid overheating

Cure Time: If the model diameter is less than 30 mm, the curing time is recommended to be 2 minutes. If the surface structure of the model is complex, it is recommended to increase the curing time properly.

Special Notes: The washing function is not quite suitable for 3D models printed with water washable resin, which is better to be washed with running water.

Comments (0)
No customer reviews for the moment.