These spools are designed for Makers who like to print BIG, or for those who have taken 3D Printing to a more professional level with production runs and mass production of various parts and prints.

PLA+ is often considered a good upgrade from the original, as it has specialised additives that are honed in to provide extra structural stability during prints, a much stronger toughness in printed parts, and overall better quality through less stringing and better layer fusing.

In terms of the actual benefits of 3kg spools compared to other sized spools, while these extra large spools are a lot more bulky and sometimes trickier to manage than the smaller 1kg spools, they do offer some distinct advantages, which include:

· No more need for tricky (and sometimes disastrous) filament changes when printing massive, multi-day masterpieces.

· Exact colour consistency over many prints, ensuring that every single part of your project is the exact same shade, hue, and saturation that you need.

· Less wasted materials at the end of each spool, which are too short to print with, but long enough to bring a tear to the thrifty Maker’s eye.

TECHNICAL SPECIFICATIONS:

Nozzle: Temperature (℃)

– 205 to 225                                                           

Nozzle: Material

– Brass / Any

Nozzle: Size (mm)

– Standard 0.4mm / Any

Bed: Temperature (℃)

– No Heat / 50 to 80

Bed: Adhesion

– BuildTak / Magigoo / Painters Tape / PEI

Printing Speed (mm/s)

– 25 to 65

Part Cooling Fan

– On from Layer 2+

Enclosure: Type

– Not Necessary

Enclosure: Temperature (℃)

– N/A

Filter

– N/A

Post-Processing

– Heating / Sanding / Painting