ELEGOO 1000G/BOTTLE Muti-colors ABS-like LCD UV-CURING PHOTOPOLYMER RAPID RESIN FOR 3D PRINTERS

Colours: 

Parameters:

【Low Shrinkage and High Precision】ELEGOO photopolymer resin is specially designed for reducing volume shrinkage during the Photocuring process, which ensures the high precision of the print model with a smooth finish.

【Fast Curing and Great Stability】ELEGOO 405nm Rapid Resin was designed to significantly reduce printing time with its excellent fluidity. Meanwhile, its great stability and proper hardness guarantee a worry-free printing experience and successful printing.

【Bright and Stunning Colors】 With high-quality pigments and photo-initiators inside ELEGOO UV-Curing resin, the models printed with resin have a very pure and stunning colour effect just like an artwork.

【Wide Applications】Given the outstanding performances, ELEGOO standard resin is suitable for most DLP/LCD 3D printers. Works best with the LCD 3D Printers.

【Safe and Secure Packaging】Leak-proof bottle fully wrapped with a plastic bubble bag and exquisitely designed package box make sure the resin stays in place where they belong

Sample Printing Parameters Setting for Elegoo Mars:

Bottom Exposure:60s

Normal Exposure:8s

Resin Parameters:

Viscosity: 150-250MPa·s

Absorption band: 385nm-410nm(wavelength)

Desity: 1.05-1.25g/cm3

Flexural Modulus: 1.882-2.385Mpa

Bending Strength: 40-70mpa

Thermal Deformation Temperature: 80℃

Volume Shrinkage: 3.72-4.24%

Linear Shrinkage: 1.05-1.35%

Tensile Strength: 30-52mpa

Tensile Modulus: 1.779-2.385mpa

Shore Hardness: 75D

Glass Transition Temperature: 100℃

Notch Impact Strength: 41-48j/m

Precautions:

(Dealing with resin could be messy and risky sometimes. To have a safer and better user experience, please follow the instructions below：)

Shake well before use

Recommended temperature is 20°C - 25°C

Always wear gloves and a mask to avoid direct skin contact

Keep away from children, dust and direct sunlight

Wash with plenty of water immediately if you get direct skin contact with resin