- New
Printing Parameters
INTRODUCTION:
ASA filament (acrylonitrile styrene acrylate) is known as a perfect all-purpose 3D printing thermoplastic, suitable for various applications. It has a similar chemical makeup to ABS plastic but provides three improvements: Excellent mechanical properties, Superior aesthetics, UV resistant, ASA material also comes in many colours, more than any other FDM material.
Tips provided to achieve good ASA Printing:
1. Preferred Printing temperature is 220-260 ºC and hot bed temperature is 90-110ºC (required)
2. If has printing difficulty, turn off cooling fan and print at slow printing speed between 20-35mm/s. Bowden feeding is totally all right.
3. Good first layer: minimize the gap between nozzle tip and hot bed as closely as possible and print on masking tape/ PEI sheet/glass bed with PVC glue/slurry/har spray or other feasible agent.
HIGHLIGHTS:
- Odorless and little shrinkage rate;
- Hydrophobicity (Will not absorb water and as such clog the extruders);
- Outstanding toughness and high impact strength;
- Good liquidity (flows smoothly);
- High mehanical strength and excellent flexibility;
- High transparency and Good gloss
No customer reviews for the moment.