GUDMAKER Maglate PEI Build Plate 235 *235mm for 3D Printing and Magnetic Sticker with 3M Adhesive

STOP DAMAGING PRINTS：

Never scratch, gouge, or damage your print or build plate ever again! Just remove the spring steel plate when finished printing, flex the part off, and snap the Maglate one back onto the included magnet! 

TWO SIDES, TWO FINISHES：

Our double-sided PEI flex plate features one powder-coated PEI surface that leaves a textured matte finish on your parts and one smooth PEI finish that leaves a glossy, reflective finish on the bottom of your parts!

PRINT RELIABLY：

Increase printing success rate with our PEI coatings. PEI grips parts with strength when heated then releases them when cooled. Print across the entire build plate with confidence. Part adhesion for our Maglate series is guaranteed!

WHY Gudmaker Maglate series：

We do lots of test to make sure the perfect status no matter for PEI Process  timing or thickness and stiffness of spring steel.   The maximum temperature for printing is 130℃ on the bed., It's perfect for materials like PLA, PETG, ABS, TPU, ASA, Nylon, and Polycarbonate!

Gudmaker's PROMISE：

For Maker, We Made. always delivery the best to Maker, We offer knowledgeable tech support if join Gudmaker membership. Reach out to us with any issues and we'll make it right!

Highlights:

1. Flexible, removable, can stick to magnetics very well. High strength and heat resistance. Suitable for Creality Ender 3/ Ender 3X/Ender 3 Pro/Ender 3 V2/Ender-3 S1/Ender 5/Ender 5 Pro,CR20/pro etc.

2. The flexible steel PEI sheet is made of high quality spring steel that won't kink or warp when you flex them, they just return back to shape!

3. No more tape, no more glue, no more shovel, and release your printing anxiety

4. Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off.

5. When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.

Note for cleaning:

Please clean the dust with a soft cloth. Wipe the stains withLow concentration alcohol gently. Do not wash or clean the PEI with any water, strong chemical reagents or strong detergents.