eSUN Light Weight PLA Filament 1.75mm, 3D Printer Filament PLA-LW, Dimensional Accuracy +/- 0.05mm, 1KG Spool, Foaming Material for 3D Printers, Natural

【Light Weight PLA】PLA-LW will begin to foam at 210-270℃ printing temperature. Under maximum foam rate 122% (270℃), its volume increases by nearly 1.2 times. Minimum extrusion rate can reach 45% to print lightweight and low-density projects by active foaming technology..

【Foaming Material】When printing same volume model, 1 roll PLA-LW filament is equivalent to 2.2 rolls Ordinary PLA filament, the foaming volume ratio can reach 220%, saving 55% material. Foaming rate and strength can be controlled by adjusting printing temperature..

【Professional for Model Airplane 】Specially Designed for Model Aircraft Enthusiasts. Light Weight. Low Density 0.54g/cm³. Lighter Wing Load. Lower Stall Speed. Better Model Aircraft Performance. Widely used in model airplanes, drones, COSPLAY and other fields..

【Matte and Delicate Surface】Excellent surface effect, basically no layer texture; Good layer bonding, easy to repair; Easy to paint, strong adhesion of surface pigments. Minimum tolerance and low warping to ensure consistent feeding and stable prints, no clogging the nozzle or extruder..

【Please Notice】Foaming rate is related to printing temperature, printing speed and nozzle melting cavity size, please compare model design wall thickness according to your printing situation, and adjust extrusion rate, temperature, speed and other printing parameters setting.

Printing Parameters:

• Print Temperature: 210-230°C (210°C recommended)
• Heat Distortion Temp (℃, 0.45MPa): 53
• Melting Flow Index (g/10min): 8.1(190℃/2.16kg)
• Tensile Strength (MPa): 32.2
• Elongation at Break (%): 68.9
• Density (g/cm3): 1.2
• Printing Speed: 40-100mm/s
• Flexural Strength(MPa): 41.31
• Flexural Modulus (MPa): 7.01
• IZOD Impact Strength (KJ/m3): 8.58
• Plate Temperature: 45-60°C