![[Pre-Order] xTool F1 Pedal Or Button Switch](https://marvle3d.co.nz/10417-side_product_default/-pre-order-xtool-f1-pedal-or-button-switch.jpg)
![[Pre-Order] xTool F1 Pedal Or Button Switch](https://marvle3d.co.nz/10420-side_product_default/-pre-order-xtool-f1-pedal-or-button-switch.jpg)
![[Promotion] Flashforge Curing box π1](https://marvle3d.co.nz/9610-side_product_default/-promotion-flashforge-curing-box-1.jpg)
![[Promotion] Flashforge Curing box π1](https://marvle3d.co.nz/9611-side_product_default/-promotion-flashforge-curing-box-1.jpg)
- New
eSun Luminous PLA Rainbow 1.75mm 1kg
$60.00
Tax Included
Auckland Local Stock
Marvle3D is Esun certificated Gold reseller in New Zealand. Visits the official Agent list on: https://www.esun3d.com/agent_catalog/agent/?search=NEW+ZEALAND
It’s modified based on PLA material, has the easy printing characteristics of PLA and is added with a gorgeous luminous star appearance.
PLA is a biological material refined from corn grains and naturally degradable without affecting the environment.
Compared with ABS, PLA does not require a closed chamber, has low shrinkage, no warping, no cracking, and can print large models without irritating odors during printing.
Product properties:
Gorgeous luminous star appearance
Absorb energy during the day and glow at night
Excellent printability, good interlayer adhesion, no warping
Precautions:
Luminous filaments are very easy to grind nozzles and extruder gears.
It is recommended to use hardened steel nozzles or ruby nozzles.
Hardened steel extruder gears can be selected if possible. If the throat printing time is long, it needs to be replaced.
Printing Parameters:
- Print Temperature: 210-230°C
- Heat Distortion Temp (℃, 0.45MPa): 53
- Melting Flow Index (g/10min): 3.5(190℃/2.16kg)
- Tensile Strength (MPa): 72
- Elongation at Break (%): 11.8
- Density (g/cm3): 1.2
- Printing Speed: 40-100mm/s
- Flexural Strength(MPa): 90
- Flexural Modulus (MPa): 1915
- IZOD Impact Strength (KJ/m3): 5.4
- Plate Temperature: 45-60°C
53 Items
Specific References
No customer reviews for the moment.
Auckland Local Stock
Marvle3D is Esun certificated Gold reseller in New Zealand. Visits the official Agent list on: https://www.esun3d.com/agent_catalog/agent/?search=NEW+ZEALAND
It’s modified based on PLA material, has the easy printing characteristics of PLA and is added with a gorgeous luminous star appearance.
PLA is a biological material refined from corn grains and naturally degradable without affecting the environment.
Compared with ABS, PLA does not require a closed chamber, has low shrinkage, no warping, no cracking, and can print large models without irritating odors during printing.
eSun Luminous PLA Rainbow 1.75mm 1kg
$60.00
Tax Included