![[Pre-Order]Polymaker PolyFlex™ TPU90 1.75mm 750G/ROLL (5 Colours available)](https://marvle3d.co.nz/10618-side_product_default/polymaker-polyflex-tpu90-175mm-5-colours.jpg)
- New
Micro Swiss CHT High Flow Nozzle for FlowTech™ Hotend (0.4mm/0.6mm)
$44.00
Tax Included
Microswiss and Bondtech have partnered to bring the High Flow nozzle to the FlowTech ecosystem. This new nozzle incorporates proprietary CHT technology, specifically designed to enhance the filament flow rate.
Size available: 0.4mm, 0.6mm
Features:
- 1. Brass body
- 2. High Flow CHT
- 3. Better layer adhesion
About this item
Microswiss and Bondtech have partnered to bring the High Flow nozzle to the FlowTech ecosystem. This new nozzle incorporates proprietary CHT technology, specifically designed to enhance the filament flow rate.
Features:
- Brass body: Plated with Non-stick Composite Additive TwinClad® XT Plating
- High Flow CHT: The FlowTech nozzle, equipped with Bondtech CHT technology, can achieve a maximum volumetric flow rate of up to 50 mm³/sec
- Better layer adhesion: More uniform layer deposition is achieved by splitting the filament flow into multiple chambers as it passes through the melt zone. This reduces gaps and weak points between layers
Compatible with
The FlowTech CHT nozzle is compatible with all FlowTech hotend models
- FlowTech™ Hotend for Creality K1 / K1 Max (M3101)
- FlowTech™ Hotend for Creality CR-10 SE (M3102)
- FlowTech™ Hotend for Creality Ender 3 V3 KE (M3103)
- FlowTech™ Hotend for Creality K1C (M3104)
- FlowTech™ Hotend for Creality Ender 3 V3 SE (M3105)
- FlowTech™ Hotend for Creality Ender 3 V3 (M3106)
- FlowTech™ Hotend for Hotend for Elegoo Neptune 4 / 4 Pro (M3107)
- FlowTech™ Hotend for Hotend for Elegoo Neptune 4 Plus/ 4 Max (M3108)
Made in Sweden by Bondtech
Assembled in USA by Microswiss
CHT High Flow Nozzles
30 Items
Specific References
You might also like
![[Local Stock] Micro Swiss FlowTech™ Hotend for Creality Ender 3 V3 KE](https://marvle3d.co.nz/9074-home_default/-local-stock-microswiss-flowtech-hotend-for-creality-ender-3-v3-ke.jpg)
![[Local Stock] Micro Swiss FlowTech™ Hotend for Creality Ender 3 V3 KE](https://marvle3d.co.nz/9069-home_default/-local-stock-microswiss-flowtech-hotend-for-creality-ender-3-v3-ke.jpg)
Customers who bought this product also bought:
Microswiss and Bondtech have partnered to bring the High Flow nozzle to the FlowTech ecosystem. This new nozzle incorporates proprietary CHT technology, specifically designed to enhance the filament flow rate.
Size available: 0.4mm, 0.6mm
Features:
- 1. Brass body
- 2. High Flow CHT
- 3. Better layer adhesion
Micro Swiss CHT High Flow Nozzle for FlowTech™ Hotend (0.4mm/0.6mm)
$44.00
Tax Included
Perfect
Quick shipping, perfect quality