![[Local Stock] Micro Swiss FlowTech™ Hotend for Creality Ender 3 V3 KE](https://marvle3d.co.nz/9074-side_product_default/-local-stock-microswiss-flowtech-hotend-for-creality-ender-3-v3-ke.jpg)
![[Local Stock] Micro Swiss FlowTech™ Hotend for Creality Ender 3 V3 KE](https://marvle3d.co.nz/9069-side_product_default/-local-stock-microswiss-flowtech-hotend-for-creality-ender-3-v3-ke.jpg)
Marvle3D Multi-Colour PETG 3D Filament
$35.00
Tax Included
PETG (Polyethylene Terephthalate Glycol-modified) offers the best of both ABS and PLA for a win-win alternative to choosing one or the other.
PETG plastic offers stiff, durable strength (like ABS) and ease of use (like PLA)—no heating bed needed.
Its easy bed adhesion and glossy type finish are also appreciated for impressive final results.
The recommended printing temperature is 237℃ and the bed temperature is 69℃ after repeated testing on our Marvle3D ANET E16 machines.
Check it out now for BETTER PRICES:
Printing Parameters:
- Best print temperature: 220-240℃
- Density: 1.23g±0.05g/cm3
- Melt flow index: 17(240℃/2.16kg)
- Tensile strength: 58Mpa
- Flexural modulus: 1073Mpa
- Elongation at break: ≥83%
- Diameter: ϕ1.75mm
- Bubble: 100% (no bubble)
- Net weight: 1kg 330m
- Plate temperature: 80-100℃
- Recommend print speed: 40-90(mm/s)
- Feed rate: 30-90mm/s
- Idling speed: 90-150mm/s
- Certification: ROHS Certified, REACH
Highlights:
- Odorless and little shrinkage rate;
- Hydrophobicity (Will does not absorb water and as such clog the extruders);
- Outstanding toughness and high impact strength;
- Good liquidity (flows smoothly);
- High mechanical strength and excellent flexibility;
- High transparency and Good gloss
Customer Testimonial:
- Product as described and items were well packaged as always. I will be buying more from this seller for sure.
- Your PETG filament is an awesome product. Special thanks to the very speedy delivery, 5-star! Very happy with this trader.
- Been through a few Marvle3D rolls and they all have been perfect. Have added it to my favourite trader list and will trade again.
PETG
286 Items
Specific References
No customer reviews for the moment.
Customers who bought this product also bought:
PETG (Polyethylene Terephthalate Glycol-modified) offers the best of both ABS and PLA for a win-win alternative to choosing one or the other.
PETG plastic offers stiff, durable strength (like ABS) and ease of use (like PLA)—no heating bed needed.
Its easy bed adhesion and glossy type finish are also appreciated for impressive final results.
The recommended printing temperature is 237℃ and the bed temperature is 69℃ after repeated testing on our Marvle3D ANET E16 machines.
Check it out now for BETTER PRICES:
Marvle3D Multi-Colour PETG 3D Filament
$35.00
Tax Included