![[Bundles] 8/10 Bottles ELEGOO ABS-LIKE LCD UV-CURING PHOTOPOLYMER RAPID RESIN](https://marvle3d.co.nz/6021-side_product_default/-bundles-810-bottles-elegoo-abs-like-lcd-uv-curing-photopolymer-rapid-resin.jpg)
![[Bundles] 8/10 Bottles ELEGOO ABS-LIKE LCD UV-CURING PHOTOPOLYMER RAPID RESIN](https://marvle3d.co.nz/5892-side_product_default/-bundles-810-bottles-elegoo-abs-like-lcd-uv-curing-photopolymer-rapid-resin.jpg)
- New
- On sale!
Bambu Lab Z Belt
$25.20
$28.00
Save 10%Tax Included
Bambu Lab New Year Sale
Overview
The Z belt is a close drive belt with a pitch length of 1142mm, it is installed at the bottom of the Bambu Lab X1/X1C printer. Its main function is to transmit the motion of the Z motor to the three Z-axis lead screws.
Compatibility
X1 Series and P1 Series
Installation
Learn more about the replacement of the Z belt for X1 series and P1 Series on Bambu Lab Wiki.
Important to know
1. The label on the Z belt you received may label as "XY belt" due to improper production operation, the actual product is the Z belt you ordered, which will not affect its functionality.
2. We apologize for any confusion this may have caused. Rest assured, we are taking immediate corrective actions to address this issue. Thank you for your understanding.
00
day
00
hour
00
min
00
sec
Overview
The Z belt is a close drive belt with a pitch length of 1142mm, it is installed at the bottom of the Bambu Lab X1/X1C printer. Its main function is to transmit the motion of the Z motor to the three Z-axis lead screws.
Compatibility
X1 Series and P1 Series
Installation
Learn more about the replacement of the Z belt for X1 series and P1 Series on Bambu Lab Wiki.
Important to know
1. The label on the Z belt you received may label as "XY belt" due to improper production operation, the actual product is the Z belt you ordered, which will not affect its functionality.
2. We apologize for any confusion this may have caused. Rest assured, we are taking immediate corrective actions to address this issue. Thank you for your understanding.
100 Items
Specific References
No customer reviews for the moment.
Overview
The Z belt is a close drive belt with a pitch length of 1142mm, it is installed at the bottom of the Bambu Lab X1/X1C printer. Its main function is to transmit the motion of the Z motor to the three Z-axis lead screws.
Compatibility
X1 Series and P1 Series
Installation
Learn more about the replacement of the Z belt for X1 series and P1 Series on Bambu Lab Wiki.
Important to know
1. The label on the Z belt you received may label as "XY belt" due to improper production operation, the actual product is the Z belt you ordered, which will not affect its functionality.
2. We apologize for any confusion this may have caused. Rest assured, we are taking immediate corrective actions to address this issue. Thank you for your understanding.
Bambu Lab Z Belt
$25.20
$28.00
Save 10%Tax Included
Bambu Lab New Year Sale