Voron 0.2-S1 3D Printer Kit by LDO - Black Frame Kit
$1,250.00
Tax included
*
Auckland Local Stock
The Voron 0.2-S1 3D printing kit by LDO is all the hardware essentials you'll need to make your very own Voron printer at home. The Voron 0.2-S1 is the smallest of the Voron-S1 printing family with a 120mm cubed build volume, but can still print at incredibly high speeds to immaculate quality. The 0.2-S1 includes features such as stainless steel linear rails, a Picobilical PCB, pre assebled build plates and a E3D Revo hotend.
*This is a general parts kit, 3D printed parts and raspberry pi are not included and will need to be sourced separately*
Default Colour: Black
Feel free to come in-store to browse our selection and have a demo.
Voron 0.2-S1 kit unboxing video:
Features and extras:
- Stainless Steel Linear Rails & HIWIN X Rails
- E3D Revo Hotend
- Picobilical PCB
- Linear rail mounting bar
- Input Shaper tool
- Pre-cut, wired, crimped and/or soldered wiring for all parts
- Partially Threaded Screws
- Precoated thread-locker on all grub screws
- 2mm drill bit
- Kirigami bed holder mod
- Slide-in nuts
- Pre-assembled build plates
- 200W Power Supply
Video about guidance for which Voron should you buy:
Included in the kit (BOM):
| Box | Item | Qty. | |
| Build Plate & Parts | Aluminum Build Plate, 120x120mm | 1 | |
| PI Film Heater (Installed), 24VDC 100W, w/ Thermal Fuse | 1 | ||
| Spring Steel Flex Plate, 120x120mm, Textured | 1 | ||
| Heater Cover Plate (Installed) | 1 | ||
| Magnetic Pad, 120x120mm | 1 | ||
| Die Springs, Yellow, 8x4x20mm | 3 | ||
| Bed Thermistor, Screw Type (for heat bed) | 1 | ||
| Drag Chain, 7x7mm | 1 | ||
| Electronics | Heatsink for Raspberry Pi | 1 | |
| Raspberry Pi 3B+ or ZERO 2W (not included in the kit) | 1 | ||
| Bigtreetech SKR Pico | 1 | ||
| MicroSD Card, 16G | 1 | ||
| Blower Fan, 3010, 24V | 2 | ||
| Axial Fan, 3006, 5V | 1 | ||
| Axial Fan, 3010, 24V | 2 | ||
| AC Inlet | 1 | ||
| Fuse, Slow Blow, 250VAC 2A | 2 | ||
| Bowden Tubing, 4x3mm | 1 | ||
| Zip Ties, 3x150mm | 100 | ||
| Print a Steppy Kit | 1 | ||
| Fasteners, Tools & Misc | Shim Washer, 6x3x0.5mm | 38+17 | |
| Hex Nut, M3 | 155 | ||
| Slide in Nut, M3 | 100 | ||
| Lock Nut, M3 | 6 | ||
| Machine Screw, SHCS, M2x6 | 75 | ||
| Machine Screw, FHCS, M2x6 | 12 | ||
| Machine Screw, SHCS, M2x8 | 12 | ||
| Machine Screw, BHCS, M2.5x6 | 6 | ||
| Machine Screw, BHCS, M3x6 | 63 | ||
| Machine Screw, FHCS, M3x8 | 7 | ||
| Machine Screw, BHCS, M3x8 | 135 | ||
| Machine Screw, BHCS, M3x10 | 37+15 | ||
| Machine Screw, BHCS, M3x12 | 33 | ||
| Machine Screw, BHCS, M3x16 | 11 | ||
| Machine Screw, BHCS, M3x25 | 12 | ||
| Machine Screw, BHCS, M3x30 | 12 | ||
| Machine Screw, BHCS, M3x35 | 33 | ||
| Machine Screw, BHCS, M3x40 | 12 | ||
| Machine Screw, SHCS, M3x50 | 2 | ||
| Self-tapping Screw, M2x10 | 35 | ||
| T Nut, 15x5.4x1.5 | 3 | ||
| Thumb Nut, M3, 304 | 3 | ||
| Heatset Insert, Brass, M3x5x4 | 60 | ||
| Tape, VHB | 1 | ||
| Rubber Feet, 14x11x9mm | 4 | ||
| Magnets, Neodymium, Round, 6x3mm | 10 | ||
| Brass Insert Solder Tip | 1 | ||
| Drill bit, 2mm | 1 | ||
| Hex Wrench, 1.5mm | 3 | ||
| Hex Wrench, 2mm | 1 | ||
| Hex Wrench, 2.5mm | 1 | ||
| Slot head screwdriver, 2.5mm | 1 | ||
| Frame Kit | LDO V0 Frame kit | 1 | |
|
LDO-1515-VRN200A, 10 pcs LDO-1515-VRN200B, 4 pcs LDO-1515-VRN200C, 2 pcs LDO-1515-VRN200D, 4pcs LDO-1515-VRN100E, 4pcs |
|||
| Linear Rail Kit |
M2 T Nut for Linear Rail, 4 pcs LDO Stainless Steel Linear Rail Kit |
1 | |
| Motor Kit | LDO V0.2 Motor Kit | 1 | |
|
LDO-36STH20-1004AHG(VRN), E Motor, 1 pc LDO-35STH52-1504AHG(VRN), AB Motor, 2 pcs LDO-42STH25-1004CL200ET(VRN), E Motor, 1 pc Anti Backlash Nut, T8, 18x24mmOD, 1 pc |
|||
| Panels | Side Panel 211mm x 229mm x 3mm Acrylic, Clear | 2 | |
| Front Door 212mm x 239mm x 3mm Acrylic, Clear | 1 | ||
| Rear Panel Top 211mm x 63mm x 3mm Acrylic, Clear Black | 1 | ||
| Rear Panel Bottom 211mm x 185mm x 3mm Acrylic, Clear Black | 1 | ||
| Mid panel 3mm Acrylic, Matte Black | 1 | ||
| Motor Panel 3mm Acrylic, Matte Black | 1 | ||
| Deck Panel 3mm Acrylic, Matte Black | 1 | ||
| TopHat Side Panel 3mm Acrylic, Clear | 4 | ||
| TopHat Top Panel 3mm Acrylic, Clear | 1 | ||
| Toolhead & Motion | Bondtech Drive Gear Kit | 1 | |
| Setscrew M4*4 DIN916 | 5 | ||
| Setscrew M3*2 DIN916 | 3 | ||
| Teflon Tube, 4x2mm | 1 | ||
| Thumb Screw Assembly | 1 | ||
| Bearing, MR85 | 2 | ||
| Bearing, F623-RS | 24 | ||
| Pulley GT2 20T (6mm wide) (5mm bore) | 2 | ||
| Open Belt, GT2, 6mm | 4 | ||
| Machine Screw, SHCS, M3x30, Partially Threaded | 2 | ||
| Machine Screw, SHCS, M3x35, Partially Threaded | 3 | ||
| Other | V0.2-S1 Upgrade Kit | 1 | |
| Other | Kirigami Bed Mount Kit | 1 | |
| Other | Picobilical PCB Kit | 1 | |
| Other | LDO V0.2 Cable Kit | 1 | |
| Other | Mornsun Power Supply, 200W, 24V | 1 | |
| Other | C13 Power Cord | 1 | |
| Other | E3D Revo Hotend LDO Edition, with 0.4/0.6mm 2 nozzles | 1 |
Voron 0.2-S1 assembly/tuning guide and additional information
Voron 0.2
You might also like
Customers who bought this product also bought:
Comments (0)
No customer reviews for the moment.
2 other products in the same category:
Auckland Local Stock
The Voron 0.2-S1 3D printing kit by LDO is all the hardware essentials you'll need to make your very own Voron printer at home. The Voron 0.2-S1 is the smallest of the Voron-S1 printing family with a 120mm cubed build volume, but can still print at incredibly high speeds to immaculate quality. The 0.2-S1 includes features such as stainless steel linear rails, a Picobilical PCB, pre assebled build plates and a E3D Revo hotend.
*This is a general parts kit, 3D printed parts and raspberry pi are not included and will need to be sourced separately*
Default Colour: Black
Feel free to come in-store to browse our selection and have a demo.