BoxTurtle is a cutting-edge, open-source AMS-style automatic filament changer designed for Klipper-powered 3D printers. Tested with VORON Design printers and other Klipper-configured machines, it simplifies multi-material and multi-color printing, providing a seamless filament swapping experience in an accessible AMS-like system.

1 piece Flex Aluminum Shaft Coupling 5mm to 8mm Type:Flexible Shaft Coupling Material: Aluminum Inner Hole Size: 5mm x 8mm Outside Diameter:19mm Length:25mm Main dimensions: d1=5mm, d2=8mm, D=19mm, L=25mm

The Creality Filament System (CFS) enhances the capabilities of the K2 Plus 3D printer by enabling multi-color printing with up to 16 colors. It features automatic filament identification, mapping, switching, and relay functions, streamlining the printing process. Advanced sensors detect filament status, while moisture-proof storage maintains filament quality. The system is designed to...

1 piece Flexible Aluminum Shaft Coupling 5mm to 8mm Clamp style  Type: Flexible Shaft Coupling ...

Brand: Marvle3D BuildEase Build Surface   <span...

Multi-Color/Multi-Material Printing for X1 and P1 Series Product Features     Multi-Colors/materials Capability     Keep Filament Dry     Filament Runout &amp; Winding Detection     AMS Filament Backup

Model Number: PEI Sheet- PEI Build Surface-with 3M 468MP Adhesive Tap  Size: 200mm     thickness:0.8 mm (pure PEI sheet...

Authorized Official NZ Distributor. The Bambu Lab AMS 2 Pro - Automatic Material System is an advanced multi-material management solution designed to enhance 3D printing efficiency. It supports up to 16 colors or materials when connected to four AMS units via the AMS Hub. The AMS 2 Pro features automatic filament loading, drying, and material switching for...

Auckland local stock Marvle3D is Flashforge's NZ local Distributor, and can be verified on https://www.flashforge.com/distributor. BUILD PLATE FOR ADVENTURE 3

Product Specification -  Size: 310mm×310×4mm (Square) Materials: Upgraded Tempered Glass covered with carbon-silicone base coating (~400C resistence) Brand: Marvle3D NOTES: 1. please use chovel to take off the print from the edge after cooling down.DOT take off directly by hand. 2. Please peel off the protective films before use and print on the...

This kit fits  Creator Pro 2 3D Printer.   <span...