- New
[Pre-order]SUNLU S4 FilaDryer, Fit Four Spools at a Time
Pre-Order
S4 FilaDryer, Fit Four Spools at a Time
Features:
[Large Capacity] Internal size 450*210*211mm.[Rapid heating] Built-in 300W PTC heater, heating to 50℃ in 30mins.
[3 levels of safety protection] PTC (Positive Temperature Coefficient Thermistor), temperature switch, and software triple protection.
[Temperature Balance] The left and right side circulating fans and the bottom heating fan in the chassis.
[Adjustable humidity] Adjust the humidity in the chassis, the humidity in the box reaches the set value (30%-50%) will automatically start.
[High compatibility] Support with all models of printers connected to the use; support 4 printers at the same time baking material printing; compatible with consumables wire diameter 1.75mm, 2.85mm, 3.0mm.
S4 FilaDryer, Fit Four Spools at a Time
[Large Capacity] Internal size 450*210*211mm, can dry 4 rolls of 1kg consumables at the same time, meet the user's multi-colour printing and multi-computer printing needs.
[Rapid heating] Built-in 300W PTC heater, heating to 50℃ in 30mins, faster and more efficient.
[3 levels of safety protection] PTC (Positive Temperature Coefficient Thermistor), temperature switch, and software triple protection, real-time temperature monitoring, and alarm prompts when the temperature is abnormal, for greater safety.
[Temperature Balance] The left and right side circulating fans and the bottom heating fan in the chassis ensure that the temperature in the chassis is balanced ±3℃, and every part of the consumables can get perfect drying effect.
[Adjustable humidity] Adjust the humidity in the chassis, the humidity in the box reaches the set value (30%-50%) will automatically start until the humidity drops to 25% and then stops, to better meet the humidity needs of different types of consumables.
[High compatibility] Support with all models of printers connected to the use; support 4 printers at the same time baking material printing; compatible with consumables wire diameter 1.75mm, 2.85mm, 3.0mm.
Name: S4-Filament Dryer
Model: S4-FD
Net weight: 4.8KG
Outer Size: 516*278*350mm
G.W.: 5.5KG
QTY/BOX: 1pc
Size: 458*218*312mm (including the height of the tripod)
Colour: Black
Maximum Capacity: 450*210*211mm
Power Input: AC 110V~240V 50Hz/60HZ
Rated Power: 320W
Contains:
1* S4 drying box, 1* power adapter, 1* user manual, 2* Teflon tubes (100cm), 4* Teflon tubes (8cm)
Warranty:
1 year warranty, the use of non-original brand power supply or not in accordance with the instructions for the correct operation of the damage caused by the warranty is not covered.
SUNLU Filadryer S4 Tech Specs
Heating Temp 70℃
Filament Capacity 1kg*4
Applicable Filament PLA,ABS,PETG,TPU,WOOD,Carbon fiber PA,PC
Heater PTC with 3 Fans
Heat time(25-50℃) 30mins
Heat time(25-70℃) 50mins
Interior Temperature Balance ±3℃
Humidity Regulation Mood Auto-drying when humidity
Desiccant Yes
Touch Screen YES
LED Status Display YES
Filament Holes 8(PTFE Available)
Power Input AC 100V~240V/50Hz/60Hz 330W
Compatible filament diameters 1.75mm, 2.85mm, 3.00mm