- On sale!
- -$5.00
- New
[Promo] ELEGOO PLA Filament 1.75mm Colored 1KG/Roll
Auckland Local Stock
Details
- High-Quality PLA Filaments
- Dimensional Accuracy & Consistency
- Less-tangle and Easy to Use
- Clog-Free & Bubble-Free
- Widely Compatible
Compatibility
- Universal compatibility with most of the common 1.75mm FDM 3D printers
Specification
- 1 kg/spool
Package Dimensions
- 21.11cm x 21.01cm x 7.29cm
Introduction video
Recommended Setting and Technical Characteristics
- Recommended Nozzle Temp: 190°C-220°C
- Recommended Heated Temp: 50-65℃
- Recommended Printing Speed: 30-70 mm/s
- Dimensional Accuracy :+/- 0.02mm
- Tensile strength (X-Y): ≥ 50 (MPa)
- Charpy impact strength: 5.4 (kJ/m²)
Specification
- Main Material: PLA (Polylactic Acid)
- Density (23℃): 1.25 g/cm³
- Glass Transition Temperature (10℃/min): 60 ℃
- Tensile Strength (50mm/min): Printing 40.5 MPa, Injection Moulding 55.3 MPa
- Elongation at Break (50mm/min): Printing 3.2%, Injection Moulding 25.5%
- Bending Strength (2m/min): Printing: 72.5 MPa, Injection Moulding: 85.5 MPa
- Bending Modulus (2m/min): Printing: 2650 MPa, Injection Moulding: 2865 MPa
- Izod Impact, Notched (23℃): Printing: 3.5 KJ/m², Injection Moulding: 5.6 KJ/m²
- Heat Distortion Temperature (0.45MPa): 53℃
- Flammability (1.6mm): Class: HB
- Infill: As needed up to 100%
- Layer Height: 0.1-0.4mm
- Extruder Temperature: 190-230℃
- Printing Speed: 30-100mm/s
- Bed Temperature: Room temperature-40℃
Features
[High-Quality PLA Filaments] Made of high-quality PLA, a commonly used thermoplastic material features lower melting temperature and ease of use, low warp and shrinkage, odorless during printing, and provides a glossy surface finish.
[Dimensional Accuracy & Consistency] Strict tolerances guarantee these PLA filaments of 1.75 mm diameter much smoother and more stable printing with the dimensional accuracy of +/- 0.02 mm; 1 kg spool.
[Less-tangle and Easy to Use] Full mechanical winding and strict manual examination to ensure that the line is neatly arranged and less tangled, and to avoid possible snap and line breaking. A larger spool inner diameter design for easy feeding.
[Clog-Free & Bubble-Free] Designed and manufactured with clog-free, superb layer bonding and great fluidity for smooth and stable extrusion. Complete dried for 24 hours before packaging and vacuum sealed with desiccants in the bag to protect the filament from moisture, no clogging and bubbling problems.
[Wide Compatibility] Universal compatibility with most of the common 1.75mm FDM 3D printers on the market due to the high-quality standards in terms of manufacturing accuracy and a small dimensional tolerance of +/- 0.02mm.
Customer Testimonials:
You might also like