Auckland Local Stock Features: Circular arc Tooth Profile Tooth Space is Small, Suitable for Straight Line Driving. 2GT System is an Extension of The HTD System With Greater Load Carrying Capacity. <p...

Product features:   Product Name:...

Overview The Bambu Lab USB-C cable is installed in the towing chain and is only suitable for Bambu Lab X1 series printers. Compatibility X1 Series, P1S, P1P

Product features: Product Name: Linear Motion Bearings  Model:...

Brand: Marvle3D BuildEase Build Surface   <span...

Overview The pack comes with 4 cables including the communication cable connecting the AC board and MC cable, the MC board power supply cable, the heat bed power cable for V3 heatbed, and the cable connecting the MC board and the AMS interface board. Compatibility X1 Series and P1 Series ...

Model Number: PEI Sheet- PEI Build Surface-with 3M 468MP Adhesive Tap  Size: 200mm     thickness:0.8 mm (pure PEI sheet...

Overview The AC board is a circuit board providing AC power for the X1 Series and P1 Series heatbed. Compatibility X1 Series and P1 Series Installation Learn more about the replacement of the AC Board on Bambu Lab Wiki. In the Box -AC Board...

Auckland local stock Marvle3D is Flashforge's NZ local Distributor, and can be verified on https://www.flashforge.com/distributor. BUILD PLATE FOR ADVENTURE 3

Overview The XY belt is an open drive belt with a pitch length of 1442mm. Its main function is to transmit the motion of the motor to the tool head with high precision. Compatibility X1 Series and P1 Series Installation Learn more about the replacement of the XY belt for X1 series and P1...

Overview The Z belt is a close drive belt with a pitch length of 1142mm, it is installed at the bottom of the Bambu Lab X1/X1C printer. Its main function is to transmit the motion of the Z motor to the three Z-axis lead screws. Compatibility X1 Series and P1 Series Installation ...

Product Specification -  Size: 310mm×310×4mm (Square) Materials: Upgraded Tempered Glass covered with carbon-silicone base coating (~400C resistence) Brand: Marvle3D NOTES: 1. please use chovel to take off the print from the edge after cooling down.DOT take off directly by hand. 2. Please peel off the protective films before use and print on the...