Auckland Local Stock Features: Circular arc Tooth Profile Tooth Space is Small, Suitable for Straight Line Driving. 2GT System is an Extension of The HTD System With Greater Load Carrying Capacity. <p...

1 piece Flex Aluminum Shaft Coupling 5mm to 8mm Type:Flexible Shaft Coupling Material: Aluminum Inner Hole Size: 5mm x 8mm Outside Diameter:19mm Length:25mm Main dimensions: d1=5mm, d2=8mm, D=19mm, L=25mm

Product features:   Product Name:...

Overview The Bambu Lab USB-C cable is installed in the towing chain and is only suitable for Bambu Lab X1 series printers. Compatibility X1 Series, P1S, P1P

Original Washing Bucket for Mercury XS Washing and Curing Station

Product features: Product Name: Linear Motion Bearings  Model:...

1 piece Flexible Aluminum Shaft Coupling 5mm to 8mm Clamp style  Type: Flexible Shaft Coupling ...

Overview The pack comes with 4 cables including the communication cable connecting the AC board and MC cable, the MC board power supply cable, the heat bed power cable for V3 heatbed, and the cable connecting the MC board and the AMS interface board. Compatibility X1 Series and P1 Series ...

Overview The AC board is a circuit board providing AC power for the X1 Series and P1 Series heatbed. Compatibility X1 Series and P1 Series Installation Learn more about the replacement of the AC Board on Bambu Lab Wiki. In the Box -AC Board...

Model: 3010  Rated  Voltage: DC   24v Type: Brushless Size: 30x30x10mm

Overview The XY belt is an open drive belt with a pitch length of 1442mm. Its main function is to transmit the motion of the motor to the tool head with high precision. Compatibility X1 Series and P1 Series Installation Learn more about the replacement of the XY belt for X1 series and P1...

Overview The Z belt is a close drive belt with a pitch length of 1142mm, it is installed at the bottom of the Bambu Lab X1/X1C printer. Its main function is to transmit the motion of the Z motor to the three Z-axis lead screws. Compatibility X1 Series and P1 Series Installation ...