Bundle Details 

Printer Only 

• Bambu Lab X1-Carbon Combo 3D Printer (AMS Unit included)

Starter Bundle

• Bambu Lab X1-Carbon Combo 3D Printer (AMS Unit included)
• CMYK bundle eSUN PLA+ Filament 1.75mm Colors: Cyan + White + Magenta + Yellow (4 rolls in total)

Dryer Bundle

• Bambu Lab X1-Carbon Combo 3D Printer (AMS Unit included)
• CMYK bundle eSUN PLA+ Filament 1.75mm Colors: Cyan + White + Magenta + Yellow (4 rolls in total)
• SUNLU S4 FilaDryer, Fit Four Spools at a Time

Description:

Colors & Beyond: Bambu Lab’s Automatic Material System (AMS) allows you to print with up to 4 colors on a single AMS, automatically recognizing Bambu Filaments and calculating how much remains. you can print up to 16 colors on a single print by combining multiple AMS's

Advanced Processes Enable Advanced Materials: with Intelligent control systems and up to 300 Degrees with an All metal hot end. Allowing materials like Nylon (PA12/ PA6) and Polycarbonate as well as carbon fiber reenforced filaments to be printed with ease and speed.

A Lidar that measures depth in micrometers: Bambu Micro Lidar brings micrometer level precision into 3D printing. The system probes the nozzle height, calibrates the flow, and scans the first layer, to avoid failures, under extrusion and ensure clean edges on your print.

Dual automated bed leveling: Bambu Lab X1 utilizes two sets of independent sensors and an algorithm to measure the height of the nozzle relative to the bed. The lidar and analog force sensors crosscheck for an extra layer of redundancy in bed leveling.

AI inspected first layer: Tired of waiting out that first layer? The lidar sensor can check your first layer to make sure the rest of your print is of the best quality possible.

Spaghetti detection: AI keeps an eye out for Spaghetti monsters, so you can sleep easy in the knowledge that your printer is safe from this scourge.

Speed: The bambu lab X1 series can reach an impressive speed of 500mm/s and 20,000mm/s² using a CoreXY system, as well as flow rates of 32mm/s³ with the 40W heater. Even at layer heights as small as 0.08 mm 

Easy to print: The X1 is assembled, tuned, calibrated, and tested before being shipped to you, so you can enjoy printing right out of the box. You can send prints by Bambu Studio, and you can control your printer anytime anywhere with Bambu Handy, SD card supported and local network to print the projects over wifi.

VOCs Filter: Activated Carbon Filter Absorbs VOCs and harmful fumes

Download X1-Carbon TDS

Tech Specs: