eSUN eVacuum Set – 3D Printing Filament Storage System

Use this fantastic set for keeping yor filament dry and achieve better print quality after longer storage without going through a drying process!

The 3D printing filament vacuum kit is a novel portable household vacuum device for vacuum storage of filaments, especially for some with high water absorption rate, such as PVA, ePA, ePA-CF, ePA-GF, ABSMAX, TPU-95A, etc.

The kit has passed BPA-FREE and FDA certification, food-grade materials, safe and environmentally friendly.

Accessories:

Air pump x1:
Size: 16.5×3.5×3.5cm
Weight: 50g
Material: ABS+ silicone
Air suction: ≥8L/min

Vacuum bag x10:
Size: 30x34cm
Material: PA+PE, certified by BPA and FDA
Thickness: 0.085mm
Storage temperature: -20 to 85℃

Humidity indicator card x15:
Environmentally friendly cobalt-free humidity indicator card, indicating range 10%～60%.

When the humidity in the environment around the humidity indicator card rises to a certain value, the corresponding indicator point on the indicator card will change from brown to light blue.

When the indicator point becomes grey (between brown and light blue), the value in the indicator point is the current ambient humidity.

Others: sealing clip x2, desiccant x15:
Note: When the humidity reaches 50%, it is recommended to replace the desiccant.

Store in a dry, cool environment; avoid direct sunlight and water.
The humidity card can be reused after drying in an oven or hot air.