![[FREE SHIPPING] LDO Milo V1.5 Millennium Mill CNC Kit](https://marvle3d.co.nz/8937-side_product_default/ldo-milo-v15-millennium-mill-cnc-kit.jpg)
![[FREE SHIPPING] LDO Milo V1.5 Millennium Mill CNC Kit](https://marvle3d.co.nz/8932-side_product_default/ldo-milo-v15-millennium-mill-cnc-kit.jpg)
Marvle3D ABS+ Multi-color 3D Filaments 1.75mm
$28.00
Tax Included
7 Colors available in Auckland store and online shop.
ABS+ is improved and upgraded based on ABS.
Cracking and warping have been significantly improved.
High Strength. Better Toughness. Heat Resistance. Excellent Impact Strength.
Option Colors:
Black| Blue| Grey| Purple| Red| White| Natural
Are you looking for a better choice with a lower price?
We also provide a 6 Rolls bundles for this filament. Check this out!
Please Select the color from the Drop-Down Lists:
Printing Parameters:
o Best print temperature: 230-250 °C
o Density: 1.04±0.05g/cm3
o Printing speed: 40-100mm/s
o Melt flow index: 12(220℃/10kg)
o Tensile strength: 43Mpa
o Flexural modulus: 1177Mpa
o Elongation at break: ≥22%
o Diameter: ϕ1.75mm ϕ3mm
o Bubble: 100% (no bubble)
o Net weight: 1kg 400m
o Plate temperature: 90-110 °C
The all-new ABS+ filament has the following features:
1. Optimized to print with significantly less warping
2. With good melt mobility and smooth printing.
3. With high toughness, hardness and rigidity, and good scratch resistance.
4. With good heat resistance and oil resistance.
Marvle ABS+
76 Items
Specific References
You might also like
Customers who bought this product also bought:
7 Colors available in Auckland store and online shop.
ABS+ is improved and upgraded based on ABS.
Cracking and warping have been significantly improved.
High Strength. Better Toughness. Heat Resistance. Excellent Impact Strength.
Option Colors:
Black| Blue| Grey| Purple| Red| White| Natural
Are you looking for a better choice with a lower price?
We also provide a 6 Rolls bundles for this filament. Check this out!
Please Select the color from the Drop-Down Lists:
Marvle3D ABS+ Multi-color 3D Filaments 1.75mm
$28.00
Tax Included
Prints very well
I don't usually bother leaving reviews, this is an exception. You have to get your printer & filament calibrations right & print on smooth bed, I'm using the PEI A plate which came with the K1Max. I use a small amount of glue to prevent it sticking to the plate too well & have found I can print at 170mm/s with no warping & when the print is finished, remove the plate, let it cool off & it all releases easily