Every Original Prusa 3D printer receives long-term support for years after launch. Not just small bugfixes, but major firmware and hardware upgrades that bring useful new features. And MK4 is no exception.

Compared to the Original Prusa MK4, the MK4S brings the following innovations:

New high-performance 360° cooling system

High-quality high-flow nozzle as standard

Native iOS/Android Prusa app for iOS and Android with easy Wi-Fi setup with an NFC tap

Improved print speed

Improved print quality

New parts printed from Prusament PC Blend Carbon Fiber or injection molded

Optional accessory: GPIO hackerboard

Optional accessory: accelerometer for printer modders

What you will get with the MK4S upgrade?

Quiet High-Speed Printing

Twice as fast as the MK3S+ and among the fastest desktop printers, the MK4S uses a native implementation of Input Shaper and Pressure Advance technologies to eliminate resonances and optimize filament flow which is further enhanced by the new high-flow nozzle. The result is doubled print speed and beautifully quiet operation, so you can keep the MK4S on your desk and continue working undisturbed. The MK4S can print a SpeedBoatRace Benchy in 14 minutes and a “Bonkers” Benchy in 8 minutes.

High-Performance 360° Cooling

The MK4S features a brand new 360° cooling system consisting of a high-performance turbine and a redesigned fan shroud - the result of intensive airflow simulations to ensure that the cold air is directed precisely onto the print. This solution is much more effective compared to blanket fans, because the airflow is not blocked by the print itself. The weight of the Nextruder remains virtually unchanged, but the performance is far better.

Even with the large turbine, the printer is still beautifully quiet and can deliver prints with extreme 75° overhangs. Why does this matter? Because where other printers would already need a hefty amount of supports, the MK4S can easily deliver a beautiful-looking print. Less supports means shorter print times and less material wasted.

High-Performance 360° Cooling

The MK4S features a brand new 360° cooling system consisting of a high-performance turbine and a redesigned fan shroud - the result of intensive airflow simulations to ensure that the cold air is directed precisely onto the print. This solution is much more effective compared to blanket fans, because the airflow is not blocked by the print itself. The weight of the Nextruder remains virtually unchanged, but the performance is far better.

Even with the large turbine, the printer is still beautifully quiet and can deliver prints with extreme 75° overhangs. Why does this matter? Because where other printers would already need a hefty amount of supports, the MK4S can easily deliver a beautiful-looking print. Less supports means shorter print times and less material wasted.

High-Flow Nozzle as Standard

The MK4S comes standard with a custom-made high-flow nozzle based on CHT technology. A high-flow nozzle enables faster printing, but also produces more durable prints. Plus, you can get more from the filaments you already know and love - you don’t have to look for any specialized high-flow filaments. Compared to the stock nozzle in the MK4, the new high-flow nozzle delivers between 50 to 114% improved flow rate depending on the material and nozzle diameter. We’re also offering an optional Nextruder nozzle adapter so you can install any kind of V6-compatible nozzle.

Optional Prusa App

Get a quick overview of all your printers, running tasks, and enables you to start, pause and stop prints from anywhere in a nice, clean design. You can also access Printables directly from the app and if a project contains a printable file, simply tap the print button and start printing it right away without the need to use a slicer. The app for iOS and Android is completely optional and is not required to configure your printer. If you prefer simplicity over smart features, you don’t have to install it at all.

Accessories for enthusiasts

The MK4S is compatible with two new optional addons for enthusiasts and modders. First, the GPIO “hackerboard” allows you to control external electronics using G-commands. And we have also introduced an accelerometer addon for those who made extensive changes to the Nextruder. You can find more details on their respective product pages.

Package Contains：

Prusa Nozzle brass CHT - 0.4mm

High-performance 360° cooling fan and fan shroud

Nextruder parts (including PCCF printed parts)

Wi-Fi board and NFC antenna

Cover for xLCD and Nextruder cover

Silicone cover for heatblock

Fasteners and other accessories

To replace the part/s, please consult our Assembly Manuals. Make sure to follow the manual for your printer model.