BoxTurtle is a cutting-edge, open-source AMS-style automatic filament changer designed for Klipper-powered 3D printers. Tested with VORON Design printers and other Klipper-configured machines, it simplifies multi-material and multi-color printing, providing a seamless filament swapping experience in an accessible AMS-like system.

Brand: Marvle3D   Item: Delta rostock...

Original Washing Bucket for Mercury XS Washing and Curing Station

3D Printing head-curved tweezer – Filament Removal and Nozzle Cleaning use

Brand: Marvle3D BuildEase Build Surface   <span...

Multi-Color/Multi-Material Printing for X1 and P1 Series Product Features     Multi-Colors/materials Capability     Keep Filament Dry     Filament Runout &amp; Winding Detection     AMS Filament Backup

great tool to remove residual filament from hot nozzle tips so to avoid hand burnt in any case;

Model Number: PEI Sheet- PEI Build Surface-with 3M 468MP Adhesive Tap  Size: 200mm     thickness:0.8 mm (pure PEI sheet...

Authorized Official NZ Distributor. The Bambu Lab AMS 2 Pro - Automatic Material System is an advanced multi-material management solution designed to enhance 3D printing efficiency. It supports up to 16 colors or materials when connected to four AMS units via the AMS Hub. The AMS 2 Pro features automatic filament loading, drying, and material switching for...

Auckland local stock Marvle3D is Flashforge's NZ local Distributor, and can be verified on https://www.flashforge.com/distributor. BUILD PLATE FOR ADVENTURE 3

These red aluminum nuts are original upgraded replacement part for Ender 3/3 Pro/3 X, Ender 5/5 Plus/ 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR 10, CR-10 Mini, CR-10S, CR 10S Pro,CR-10 Plus, CR-X, CR 20.

Product Specification -  Size: 310mm×310×4mm (Square) Materials: Upgraded Tempered Glass covered with carbon-silicone base coating (~400C resistence) Brand: Marvle3D NOTES: 1. please use chovel to take off the print from the edge after cooling down.DOT take off directly by hand. 2. Please peel off the protective films before use and print on the...